FIELDS OF OPERATION

1. The DMC 70H is manufactured to the highest standards.
2. Capable of demagnetising bars, billets, spindles, shafts, pipes, tools and jigs etc.
3. Encapsulated in solid Polyurethane, making it crack resistant, chemical resistant and durable.
4. Ideal workshop site or lab tool.
5. Simple operation.

CE OPERATION

1. The DMC 70H is placed at one end of the component / bar / shaft.
2. The trigger is pressed and the coil is slid down the component and removed to approximately 0.5 m away.
3. Alternatively components can be passed through the energised stationary coil and withdrawn to 0.5m away.
4. Thermal cut out (auto re-set) protection.

MODELS AVAILABLE

1. DMC 70H (Hand Held) as shown
2. DMC 70B (Bench Mounted) – for smaller components/tools etc.

SPECIFICATIONS

VOLTAGE: 220-240v single phase 50-60Hz
CURRENT: 0.65A
FIELD STRENGTH: >200 Gauss at centre. (Powerful)
DIMENSIONS: (Poly Body) Height 190mm x width 130mm x 69mm Aperture
DUTY CYCLE: 25%. (Max on time 30 seconds)
WEIGHT: 3Kg
LEADS: 4m mains cable