FIELDS OF OPERATION
- The DMC 70H is manufactured to the highest standards.
- Capable of demagnetising bars, billets, spindles, shafts, pipes, tools and jigs etc.
- Encapsulated in solid Polyurethane, making it crack resistant, chemical resistant and durable.
- Ideal workshop site or lab tool.
- Simple operation.
CE OPERATION
- The DMC 70H is placed at one end of the component / bar / shaft.
- The trigger is pressed and the coil is slid down the component and removed to approximately 0.5 m away.
- Alternatively components can be passed through the energised stationary coil and withdrawn to 0.5m away.
- Thermal cut out (auto re-set) protection.
MODELS AVAILABLE
- DMC 70H (Hand Held) as shown
- DMC 70B (Bench Mounted) – for smaller components/tools etc.
SPECIFICATIONS
- VOLTAGE: 220-240v single phase 50-60Hz
- CURRENT: 0.65A
- FIELD STRENGTH: >200 Gauss at centre. (Powerful)
- DIMENSIONS: (Poly Body) Height 190mm x width 130mm x 69mm Aperture
- DUTY CYCLE: 25%. (Max on time 30 seconds)
- WEIGHT: 3Kg
- LEADS: 4m mains cable
